PRICE GUIDE · ELECTRICAL · 2026–2027
Data & Network Cabling cost in Ireland
€150–€800 per job. Typically €350.
A data & network cabling in Ireland costs €150–€800 per job, typically around €350. The price is set by number of data points, cable category (cat6/6a) and runs, patch panel and switch.
- Search and compare — no account needed
- Nearest to you first
- One score from Google, Trustpilot and Locufy reviews
HOW MUCH IT COSTS
How much does data & network cabling cost in Ireland?
| Low end | €150 | a simple job, off-peak, outside the cities |
|---|---|---|
| Typical | €350 | what most people pay |
| High end | €800 | the biggest jobs, short notice, Dublin |
Locufy guide prices for 2026–2027. Updated 2026. A national range, not a quote — enter your town above for real prices from the electricians and electrical firms near you.
What moves the price
- Number of data points — every extra point needs its own cable run, faceplate and test.
- Type of cabling required — shielded or higher-category cable costs more and is slower to route and terminate than standard network cable.
- Length of the run needed — longer runs between rooms or floors use more cable and take longer to route out of sight.
- Condition of existing infrastructure — old ducting, full trunking or blocked routes may need clearing or replacing before new cable goes in.
- Materials used — cable and network hardware are bought for the job and billed at what they cost.
- Patch panel and switch — terminating cables at a patch panel and fitting a network switch adds parts and setting-up time.
Services for the maintenance and repair of the dwelling prices in Ireland are up 23% over five years (CSO Consumer Price Index, Services for the maintenance and repair of the dwelling, to 2025 December). Five years ago a typical data & network cabling would have cost about €280 — an estimate from today's guide price and that index, not a recorded price. Source: CSO CPM18, CPM12 →
WHAT YOU GET
What a data & network cabling booking includes
Takes: The duration of a cabling installation can range from a few hours to a full day, depending on the size of the job and the number of cables being installed..
WHAT PEOPLE BOOK
Common data & network cabling jobs
KNOW THE PRICE? NOW SEE THE REAL ONES
Data & Network Cabling near you, with prices shown
The electricians and electrical firms that cover your area, nearest first, each with their price and one score from every review. No account needed to look.
Or post the job free and let them come to you.
How to pay less
- Running all the data points in one visit costs less than adding cables room by room later.
- Having the network cabling done during a renovation, before walls are closed up, costs less than running cable through finished rooms.
- Using existing ducting or old phone cable routes, where they are sound, can cut the time to run new data cable.
- Limiting wired data points to the rooms that need them, such as the home office and the living room, keeps the job smaller.
- Supplying your own network switch, if you already have one, can save buying a new one with the cabling.
Before you book
- Access to all areas where cabling will be installed.
- Information on the types of devices that will be connected to the network.
- Any specific requirements for the cabling layout or design.
- Potentially existing infrastructure details, such as current cabling or hardware.
- You can ask whether the network cabling installer is qualified for data cabling and how they test and certify the cabling to current standards.
Data & Network Cabling cost: questions people ask
The cost can vary based on the complexity of the installation, the type of cabling required, and the length of the run needed. Additional factors like the need for network configuration or testing can also impact the overall price.
The duration of a cabling installation can range from a few hours to a full day, depending on the size of the job and the number of cables being installed. A straightforward residential setup may take less time compared to a complex commercial installation.
While general contractors can perform basic installations, it is advisable to hire a qualified specialist, especially for complex systems or where regulatory compliance is required. This ensures that the installation meets safety and performance standards.
Many professionals offer emergency or same-day services, particularly for urgent network issues. However, availability may vary, and such services often come at a premium price.
Yes, it is often possible to book several related services, such as network setup and troubleshooting, during a single visit. This can lead to cost savings and a more efficient use of time.
Out of scope work may include extensive structural modifications, such as major renovations to walls or ceilings, as well as non-cabling related IT services like software installation or network security setup. Ensure that the professional has relevant qualifications and experience in data cabling.
MORE GUIDES