PRICE GUIDE · HOME REPAIRS & HANDYMAN

Washing Machine Repair cost in the UK
£70–£400 per repair. Typically £125.

Expect to pay £70–£400 to have a washing machine fixed in the UK, with £125 about average. Most bills come from a blocked pump, a torn door seal or worn brushes; a new motor, drum bearings or control board are what push a repair towards the top of the range.

  • Search and compare — no account needed
  • Nearest to you first
  • One score from Google, Trustpilot and Locufy reviews

HOW MUCH IT COSTS

How much does washing machine repair cost in the UK?

WASHING MACHINE REPAIR PRICE · PER REPAIR · THE UK
Low end£70a blocked pump on a freestanding machine
Typical£125what most people pay
High end£400a motor, bearings or board, or a London engineer
Typical £125
£70 low£400 high

Locufy guide prices for 2026–2027. Updated 2026. A national range, not a quote — enter your town above for real prices from the handymen and repair firms near you.

What moves the price

  • The fault — a blocked pump is quick, while a new motor, bearings or control board is the dearest repair
  • Drum bearings — a noisy spin often means bearings, which can mean stripping the whole washing machine
  • Integrated machines — a washing machine behind a kitchen door panel takes longer to remove and refit
  • Hard water — limescale in much of England wears heaters and valves in a washing machine sooner
  • Diagnostic visit — a call-out fee to find the fault is often deducted if the repair goes ahead
  • London and the South East — washing machine engineers there charge more than elsewhere in the UK
+6%PRICE TREND · 5 YEARS

Home repair prices in the UK are up 6% over five years (ONS Consumer Price Inflation, Services for maintenance and repair, to 2026 August). Five years ago a typical washing machine repair would have cost about £115 — an estimate from today's guide price and that index, not a recorded price. Source: ONS MM23 D7DO →

WHAT YOU GET

What a washing machine repair booking includes

Fault diagnosisThe washing machine tested to find why it will not drain, spin, heat or start.
Parts fittedThe failed pump, seal, brushes, belt, element or board replaced.
Leak checkHoses, seals and the sump checked so the machine stays dry under it.
Test washA short wash and spin run to confirm the repair.

Takes: One to three hours for most repairs; a bearing change can take longer. Not included: A new washing machine, plumbing in a replacement and disposal of the old one are priced separately — see the related guides below.

WHAT PEOPLE BOOK

Common washing machine repair jobs

Will not drainA coin cleared from the pump in a terrace in Morley.
Leaking door sealA split door gasket replaced in a flat in Ealing.
Not spinningWorn motor brushes replaced in a semi in Kirkintilloch.
Loud on the spinDrum bearings replaced in a washing machine in Clifton.
Not heatingA failed heating element changed.
Door locked shutA faulty door interlock replaced and the door freed.

KNOW THE PRICE? NOW SEE THE REAL ONES

Washing Machine Repair near you, with prices shown

The handymen and repair firms that cover your area, nearest first, each with their price and one score from every review. No account needed to look.

Or post the job free and let them come to you.

How to pay less

  • Clean the washing machine pump filter yourself, as blockages are the most common call-out
  • Run a hot maintenance wash monthly to keep limescale and grime off the washing machine heater
  • Book the washing machine repair as soon as the spin turns noisy, before worn bearings damage the drum

Before you book

  • Note the make and model on the washing machine door rim so the engineer brings likely parts
  • Drain any trapped water through the filter into a tray and towel before the visit
  • Check whether the washing machine is still covered by a guarantee or extended warranty
  • Clear a path so the washing machine can be pulled out and laid back if needed

Washing Machine Repair cost: questions people ask

£70–£400, with £125 about average. A blocked pump costs least; a new motor or control board in London costs most.

One to three hours for most faults. A drum bearing change can take half a day.

Under the Consumer Rights Act, a machine that is faulty within its early months should be repaired, replaced or refunded by the retailer, so go to them first.

For a pump, seal or brushes, almost always. For bearings or a board on a machine seven or eight years old, compare the bill with a new one.

A replacement machine, plumbing in a new one and taking the old one away are separate costs.

They are Locufy guide prices for the UK, set from published UK washing machine repair cost guides. They show a national range, not a quote for your machine.